BMS คุณภาพดี สำหรับประกอบเซลล์แบตลิเธียมฟอสเฟส 3.2V. 4S. 12V.

พิกัด 25A. ทั้ง recharge/discharge (ชาร์จ/ใช้)

(3.2V Rated LiFePO4 Battery bms)

common Version : common port for charge/discharge
We can customize any PCB from 1S to 30S lithium batteries with different current.

1. Overview

◆The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

◆According to the customer request we can develop PCM in different sizes and structures.

◆BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.

2. Advantage

◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

◆Strong load ability, constant discharge current 35A/45A/60A , use high voltage resistance, low inner

resistance power Mosfet. The heat sink will greatly help cooling.

◆IC itself has power balancing function. The circuit is simple and reliable.

◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection

function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.

◆Extreme low power consumption. The consumption of the whole device is less than 50uA.

◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

ปล.ศึกษาทำความเข้าใจการประกอบ BMS ก่อนนะครับ เพราะถ้าต่อผิด BMS เสี่ยงพังได้เลยครับ